Wind Speed Anemometer 5V High Accuracy Monitoring Sensor 2.62ft Extension Cable, Versatile Wiring Options, Wide Application, Premium Material, Interference Suitable

Specification:Item Type: Wind Speed AnemometerMaterial: ABSSize: Approx. 158x180x70mm/6.22x7.09x2.76in Output: 0-2.5VMeasurement Range: Wind Speed 0-45m/sConnection Extension Cable Length: Approx. 0.8m/31.50inAccuracy: ±(0.5+0.02V)m/sResolution: 0.1m/sStart up Wind Speed: ≤0.8m/sMaximum Power Consumption: 0.48WOperating Environment: Temperature -35°C to 60°C, humidity ≤100% without condensation : IP64 waterproofApplication: Greenhouse, Environmental , Meteorological Station, Ship, Pier, Farming, Advertising Gate, Meteorology, Marine, Environmental, Airport, Port, Laboratory, and Traffic wind speed measurement environmentsCalculation : 0-2.5V:F=V/2.5*A+BF: Wind speed value, m/s;A: Sensor range width (upper range minus lower limit);B: The lowest value of the sensor range (the lower limit of the range);Wiring (wire color output ): Red-Positive, Black-Negative, Yellow-Diameter: Approx. 63mm/2.48inMounting Hole Diameter: Approx. 3.2mm/0.13inMounting Depth: Approx. 15mm/0.59in (recommend reserving 25mm for wiring, wire first, then install fixed sensor)Troubleshooting: 1. The wind blade does not rotate smoothly, the delay is large. Due to foreign objects or jamming in the bearing after term use. Please return the sensor to the company for processing; 2. The display value is incorrect. It may be caused by wiring problems or communication interface failures that prevent correct data retrieval. Please check if the wiring is correct and secure, if the interface is occupied, and if the interface settings are correct.How to Use:1. Make sure the mounting bracket is parallel to the ground2. Using M3 screws and nuts, fix the sensor on the mounting bracket through the 4 mounting holes on the sensor3. Through the reserved M23 route hole, connect the aviation plug joint with the navigation

• [Long-lasting Performance] The 2.62ft extension cable is , and features a sealed o design at the connection point, ensuring and enduring performance.
• [Versatile Wiring Options] Compatible with both bottom and side wiring, making it easy to use and adaptable to various setups.
• [Highly to Interference] Equipped with strong and interference resistance, this compact and lightweight wind speed detector is easy to carry and assemble.
• [Premium Material] The abs wind cups require minimal wind speeds to engage, offering and erosion for reliable and accurate measurements.
• [Wide Range of Applications] Ideal for greenhouses, meteorological stations, ships, docks, and more, this abs material wind speed anemometer offers high strength and durability.